This edition of the siliconeoil industry brief follows the surfactant and foam-additive value chain from a Wuxi adhesives conference to the PU China 2026 exhibition floor, flame-retardant synthesis literature and corporate disclosures dated 17 November 2026. Four items are drawn from material published today and over the past two weeks. Supplier advertisements, promotional product listings, quotation pages, telephone numbers, instant-messaging contacts and QR codes have been excluded, and source names appear as plain text rather than promotional links.
![]()
Bio-based polyols and low-VOC systems are moving the formulation decision upstream to the molecule. (Original illustration)
1. Wuxi Conference Puts Bio-based Polyols and Low-VOC Polyurethane Systems at the Formulation Core
1. Summary: A report published 17 November covers the 9th Waterborne Adhesives Forum and the 17th Polyurethane Adhesives Technology and Information Exchange Conference, held in Wuxi on 9 and 10 November. The two meetings drew close to 200 delegates and 31 technical presentations, with green, low-carbon and high-performance chemistry as the organising theme. Cargill Bioindustrial presented its Priplast series of bio-based dimer-acid polyester polyols, with hydrophobicity, hydrolysis resistance, thermal-oxidative stability and UV resistance said to improve bonding at 85 degrees Celsius and 85 percent relative humidity; bio-based content reaches 100 percent and life-cycle and ISCC PLUS documentation is available. Changhua Chemical described Carnol, a polyol made from carbon dioxide in industrial exhaust, whose carbonate segments supply adhesion, heat and solvent resistance while ether links add hydrolysis resistance and flexibility for synthetic leather, textiles, adhesives and elastomers. Dow’s structural and thermally conductive adhesive platform was framed around lightweighting, full-temperature performance for all-solid-state battery assembly and local-heating disassembly for recycling. Jiangnan University reported intrinsically flame-retardant, heat-aging and antibacterial polyurethane materials from lignin-derived plant polyphenols. Other sessions covered fumed silica reinforcement, one-component waterborne systems with self-crosslinking groups and no pot life, waterborne polyurethane blended with chloroprene latex for sponge bonding, and silica-sol-based soap-free emulsion polymerisation. BASF said it is localising Acronal waterborne acrylic pressure-sensitive adhesives in China, while speakers from East China University of Science and Technology and others set volatile-organic-compound compliance as a hard constraint.
2. Source: Report on the 9th Waterborne Adhesives Forum and the 17th Polyurethane Adhesives Technology and Information Exchange Conference, CATIA and 10jqka, 17 Nov 2026. Product and equipment promotions were removed.
3. Editor’s Pick + Reason: The 85 degrees Celsius and 85 percent relative humidity bonding claim for a 100 percent bio-based dimer-acid polyol. Reason: It converts a sustainability certificate into a measurable condition a formulator can test, and it sits upstream of the catalyst and chain-extender choices that fix the cure profile.
2. PU China 2026 Puts Silicone Surfactants and Specialty Catalysts at the Centre of Foam Upgrading
1. Summary: Reporting on the 22nd China International Polyurethane Exhibition (PU China 2026, Shanghai, 3–5 November) frames the industry as leaving scale expansion behind for raw-material innovation, emerging applications and full-chain green transition. Meiside Chemical chairman Sun Yu said high-end additives remain in short supply despite ample mid- and low-end capacity, and launched ultra-low-conductivity rigid-foam and compression-resistant flexible-foam silicone stabilisers for cold-chain insulation and exported compressed mattresses. Xiangyuan New Materials chairman Zhou Jian urged co-compounding with downstream processors and full-chain validation; the company showed an HMDEA chain extender for high-transparency energy-storage protective films in electronics and photovoltaics. Conch Hengguang exhibited ZF10 and other new specialty amine catalysts described as supporting domestic mass production of high-end specialty polyurethane and filling a domestic technology gap. A separate show report records Evonik pairing TEGOSTAB silicone surfactants with DABCO and POLYCAT amine catalysts for rigid foam, plus global debuts of TEGOSTAB B 8273 with ORTEGOL 700 and B 8292 for viscoelastic and moulded MDI foam; DABCO NE 1067 is an ultra-low-emission catalyst and DABCO SI 1218 LO a low-odor surfactant for automotive moulded foam targeting VDA 278, joined by lower-GWP TEGOSTAB B 8751 LCF and B 8763 LCF. Chongyao showed the WynPUF surfactant range, including XH-1641 low-conductivity silicone oil for appliances and XH-2596 compression-resistant silicone oil for fast rebound and lower block density gradient. With HCFC-141b fully phased out this year, HFO, HFC-245fa and all-water blowing systems are forcing catalyst packages to be re-qualified.
2. Source: China Chemical Industry News (ccin.com.cn) via Sina Finance, 11 Nov 2026; PUdaily (pudaily.com), 5 Nov 2026; PlasInsight PU China 2026 show report, Nov 2026.
3. Editor’s Pick + Reason: Meiside’s two silicone stabilisers being tied to named end-use conditions rather than generic performance claims. Reason: Ultra-low conductivity for cold-chain insulation and compression resistance for exported mattress-in-a-box are auditable qualification targets, showing where margin is moving in an oversupplied commodity segment and why suppliers are investing in joint downstream validation instead of competing on tonnage.
![]()
Flame-retardant chemistry and low-emission catalyst packages are converging in high-specification foam. (Original illustration)
3. Phosphorus–Nitrogen Modification Defines the Flame-Retardant Silicone Oil Route
1. Summary: A technical review of flame-retardant silicone oil for polyurethane sets out three synthesis routes and their performance ceilings. Chemical modification introduces phosphate or amino groups onto the siloxane backbone: hydrosilylation of hydrogen-containing silicone oil with vinyl phosphate under platinum catalysis gives phosphorus contents of 5 to 8 percent and a limiting oxygen index (LOI) above 30 percent, while condensation of amino silicone oil with cyclic phosphate delivers a nitrogen–phosphorus synergistic LOI of 32 to 35 percent. Physical blending with ammonium polyphosphate or aluminium hydroxide reaches only LOI 28 to 30 percent and needs a silane coupling agent such as KH-550 at a typical 100:20:5 silicone-to-retardant-to-coupling ratio. Solvent-free routes are gaining attention: synthesis in supercritical carbon dioxide at 60–80 degrees Celsius and 10–15 megapascals avoids residual organic solvent, and bio-based silicone oils from castor-oil derivatives show markedly better degradability above 40 percent bio-carbon. For polyurethane processing, viscosity of 500 to 2000 centipoise matches forming requirements; above 3000 centipoise foaming becomes uneven. Phosphorus-modified grades suit flexible foam at LOI of at least 28 percent, nitrogen-modified grades rigid foam at least 32 percent. Temperature-triggered “smart” grades releasing retardant at 150–200 degrees Celsius and MXene composites that cut heat-release rate by more than 50 percent are cited as forward paths. At PU China 2026, Sikerui showcased B1-grade flame-retardant polyester polyol for high flame-retardant insulation in exterior walls and cold storage, and Jiangsu Unord presented phosphate-series retardants for flexible foam.
2. Source: Baidu B2B Wiki technical article, “Synthesis methods of flame-retardant silicone oil for polyurethane”, citing Polymer Degradation and Stability, Green Chemistry, ACS Nano and CN114456032A; PU China 2026 exhibition report, China Chemical Industry News, 11 Nov 2026. Supplier quotations and contact details were excluded.
3. Editor’s Pick + Reason: The 500–2000 centipoise processing window and the warning that grades above 3000 centipoise foam unevenly. Reason: It turns a chemistry-led LOI discussion into a specification a production line can act on, linking molecular design directly to cell uniformity and scrap rate rather than to a certificate alone.
4. Huntsman JEFFCAT Portfolio and BASF MDI Start-up Signal Feedstock Integration
1. Summary: A corporate and market round-up published on 17 November puts the specialty amine portfolio in focus. Huntsman closed at 9.30 US dollars, down 2.41 percent on the session with turnover of 15.12 million dollars and a market capitalisation of 1.63 billion. Its latest quarter showed revenue of 1.717 billion dollars, up 17.6 percent year on year, with the net loss narrowing to 18 million from 25 million. The company’s performance products segment manufactures polyetheramines, ethyleneamines, DGA agent, JEFFCAT catalysts and E-GRADE specialty amines and carbonates. These amines serve polyurethane foam, fuel and lubricant additives, paints and coatings, composites, gas treatment, building materials and semiconductor cleaning solutions, making the segment a direct read on diversified amine demand rather than a single end market. At PU China 2026 the company highlighted JEFFADD aldehyde absorbers for controlling formaldehyde, acetaldehyde and acrolein in automotive interiors, and JEFFCAT low-odor amine catalysts with low odour, fast cure and high stability for household foam. Separately, BASF marked the start-up on 11 November of a new MDI plant at its Geismar site in Louisiana, the company’s largest wholly owned North American investment at about 1 billion dollars. The third phase of a programme begun in 2018 added upstream units and a separation unit, nearly doubling site MDI capacity to about 600,000 tonnes per year and making BASF the largest MDI producer in North America; aniline capacity was raised alongside it, strengthening an integrated chain that also supplies agrochemicals, rubber, dyes and pigments.
2. Source: Huntsman market note and BASF Geismar MDI start-up report, Sina Finance, 17 Nov 2026; PU China 2026 show report, PUdaily, 4 Nov 2026. Stock promotion, price-target commentary and quotation pages were excluded.
3. Editor’s Pick + Reason: Huntsman listing semiconductor cleaning alongside gas treatment and polyurethane foam as amine end markets. Reason: It shows one amine portfolio spanning commodity and high-specification uses, so capacity or qualification decisions in one outlet cannot be read in isolation from the others; BASF’s integrated MDI and aniline expansion sets the upstream cost base against which foam catalyst and surfactant packages will be priced.
Compiled 17 November 2026. Illustrations are original, AI-generated, free of third-party licensing claims and free of watermarks. Dates and times refer to GMT+8.