2-ethylhexanoic acid potassium CAS3164-85-0 K-15
Pu catalyst: K-15 Active ingredients: CAS:3164-85-0
Common name: Potassium isooctanoate solution
Other Chemical names:
|Section 1: Chemical Product and Company Identification|
1.1 Product Name: K-15
Catalog Codes: Not available.
RTECS: Not available.
TSCA: Not available.
Chemical Formula: C8H18KO3
Shanghai Qiguang Industry and Trade co., LTD.
Floor 5, qigang building, 581 yanchang middle road,
District, Shanghai, China.
International Sales: +86-21-56777378
Order Online: www.51qiguang.com
CHEMTREC (24HR Emergency Telephone), call:
International CHEMTREC, call: +86-21-56777378
Physical and chemical properties:
Odor: No odor.
Relative density: 1.13 (water=1)
Vapor pressure: < 19.20 mmHg at 21 °C
Density: 70.544 lb/ft3 (1.13 g/cm3) at 70 °F (21 °C)
Point Boiling Point/Range: > 572 °F (> 300 °C)
Flash point: 137.78 °C
Viscosity: 6000~1200mPas(25 °C)
Water solubility: completely dissolved.
Product use: Polyurethane catalyst
Shanghai Qiguang Industry & Trade Co., Ltd.
Flashing Point 〉138°C
Appearance Light yellow Liquid
Viscosity,25℃ mPa.s 9500 max
Water Solubility Soluble
Calcualted OH Number(mg KOH) 271
Density,25 ℃ g/cm3 1.13
It’s available in bulk and drums. It must be protect from fire, explosions, sources of ignition and electrostatic charges, acids and acid forming substance.
It’s also corrosive. Ensure thorough ventilation of work and storage area.
24 months in unopened.
DC K-15 is a solution of potassium-salt in diethylene glycol. It promotes the isocyanurate reaction and is used in a wide range of rigid foam applications. For better surface curing, improved adhesion and better flow alternatives, consider DC TMR-2 catalysts.
DC K-15 is an excellent and cost-effective isocyanurate catalyst. Its high conversion rate has established it as the catalyst of choice in a number of rigid applications.
Features and uses:
Used in the production of rigid isocyanate foams.
K-15 is a solution of potassium-salt in diethylene glycol. It promotes the isocyanate reaction and is used in a wide range of rigid foam applications. For better surface curing, improved adhesion and better flow alternatives, consider TMR-2 catalysts.
K-15 is an excellent and cost-effective isocyanate catalyst. Its high conversion rate has established it as the catalyst of choice in a number of rigid applications.
Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.